Kenwood KDC MP438U Instruction Manual - Page 12
Menu Operation - preout
UPC - 019048176417
View all Kenwood KDC MP438U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Menu Operation Menu System Set up the following functions; "SECURITY Referto SET"/ page 12 "SECURITY CLR" "CLOCK Refer to Sets the clock, m ADJUST" page 13 "DISPLAY" ON*/OFF Turns off the display when no "DIMMER" *1,2,3 operation is performed, m AUTO*/OFF Dims the display in conjunction with the light switch of the vehicle. "DIMMER"*4 ON/OFF* "DOT LINE" OW/OFF "SWPRE"*1.4 REAR*/ SUB-W "AMP"*1,2 OW/OFF Adjusts the brightness of the display according to the surrounding illumination, m Specifies whether to display the red dotted line on the display. Sets the preout output. m m Turns on/off the built-in amplifier. "AMS Refer to Controls the connected LX CONTROl"*1 page 13 amplifier. "ZONE2"*1,2,J REAR*/ FRONT Specifies the destination of AUX (]iJ input sound when the Dual Zone function is tu rned on. "SUPREME" OW/OFF "CRSC' OFF/ON* "NAME SET" Refer to page 14 Turns ON/OFF the Supreme function. Switches to Monaural to decrease liD noise when reception is poor. Sets the display when switched r.tm3 to AUX source, source to which the item is displayed. m : (]iJ: Can be set in other than standby state. Can be set in standby state. . . : Can be set while Audio file source of CD/USB (excluding iPod). liD: Can be set during FM reception. Em: Can be set during Satellite radio source. r.tm3 :Can be set while accessing AUX source. GIED: Can be set while HD Radio source. - : Can be set during all sources. 1 Enter Menu mode Press the [MJOG] button for at least 1 second. "MENU" is displayed. 2 Select the menu item Push the Control knob towards up or down. 3 Set the menu item Push the Control knob towards right or left. 4 Exit Menu mode Press the [MJOG] button. ~ • Refer to the respective page for information on how to set the items with reference page number. • "ZONE2"is displayed when "2Z0NE"in (page 7) is set to "ON. • Refer to the (page 16) for the details of the menu items, • Strong electrical fields (such as from power lines) may cause unstable sound quality when CRSC is turned ON. In such a situation, turn it OFF. Activating Security Code "SCROll" "RECEIVE MODE" AUTO*/ MANUAL Refer to page 14 Specifies whether the text is scrolled automatically. Sets the receive mode of HR radio. GIED "ESN" Displays the Electronic Serial "AUX" Number of satellite radio. -OF-F/O-N-1*-/ Sets whether to display AUX m ON2 -"C-D-R-EA-D-"- 1*/2 during source selection. Sets the CD read mode, m • You can set the Security Code with a 4 digit number of your choice. • The Security Code cannot be displayed or referenced, Make a note of the Security Code and treasure it up, 1 Select Security Code item during Menu mode Select the "SECURITY SET' display. For how to select menu items, refer to (page 12). 2 Enter Security Code mode *Factory setting *1 Function of KDC-X492. *2 Function of KDC-MP438U. *3 Function of KDC-MP408U. *4 Function of KDC-MP338. Press the Control knob for at least 1 second. When "ENTER" is displayed, "CODE" is also displayed. 3 Select the digits to enter Push the Control knob towards right or left. Displayed item is depending on currently selected 4 Select the Security Code numbers source, The mark in Source column shows the Push the Control knob towards up or down. 12 I KDC-X492/KDC-MP438U/KDC-MP408U/KDC-MP338