Kenwood KDC MP438U Instruction Manual - Page 7

Audio Setup, Speaker Setting - remote control

Page 7 highlights

Audio Setup - - - - You can set Sound system, such as follows; Front High Pass Filter* "HPF" Through/40*'/60*'/80/100/120/ 1501180/220*' Hz Rear High Pass Filter* "HPR" Through/40*1/60*1/80/100/120/ 1501180/220*' Hz Low Pass Filter "LPF SW" 50*'/60*1.2/801100*1/1201160*3/ Through Hz Subwoofer Phase* "PHASE" Reverse (180°)/ Normal (0°) Volume offset "V-OFFSET" -8 - ±O (AUX: -8- +8) Loudness* "LOUDNESS" OFF/ON Dual Zone System* "2Z0NE" OFF/ON *Function of KDC-X492/KDC-MP438U/KDC-MP408U. *lKDC-X492 only. *2KDC-MP438U/KDC-MP408U only. *3KDC-MP338 only. ~ • Volume offset: Sets each source's volume as a difference from the basic volume. • Loudness: Compensates for low and high tones during low volume. (Only the low tone is compensated for when the tuner is selected as a source.) Dual lone System Main source and sub source (Auxiliary input) output Front channel and Rear channel separately. - Set up the channel of sub source by "lONE2" of (page 12). - Select Main source by [SRC] button. - Adjust the volume of Front channel by Control knob. - Adjust the volume of Rear channel by (page 6) or [.~]I[T] button on the remote control (page 15). - The Audio Control has no effect on sub source. 1 Select the source to adjust Press the [SRC] button. 2 Enter Audio Setup mode Press the Control knob for at least 1 second. 3 Select the Audio Setup item to adjust Press the Control knob. 4 Adjust the Audio setup item Turn the Control knob. S Exit Audio Setup mode Press the Control knob for at least 1 second. Speaker Setting Fine-tuning so that the System Q value is optimal 11."""""_- when setting the speaker type as follows; OFF "SP SEL OFF" For 5&4in. speaker "SP SEL 5/4" For 6&6x9 in. speaker "SP SEL 6*9/6" For the OEM speaker "SP SEL OEM" 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. 2 Enter Speaker Setting mode Press the Control knob. 3 Select the Speaker type Turn the Control knob. 4 Exit Speaker Setting mode Press the Control knob. English I 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

Audio Setup
You
can
set
Sound
system,
such
as
follows;
----
Front
High
Pass
Filter*
"HPF"
Through/40*'/60*'/80/100/120/
1501180/220*'
Hz
Rear
High
Pass
Filter*
"HPR"
Through/40*1/60*1/80/100/120/
1501180/220*'
Hz
Low
Pass
Filter
"LPF
SW"
50*'/60*1.2/801100*1/1201160*3/
Through
Hz
Subwoofer
Phase*
"PHASE"
Reverse
(180°)/
Normal
(0°)
Volume
offset
"V-OFFSET"
-8 -
±O
(AUX:
-8-
+8)
Loudness*
"LOUDNESS"
OFF/ON
Dual
Zone
System*
"2Z0NE"
OFF/ON
*Function
of
KDC-X492/KDC-MP438U/KDC-MP408U.
*lKDC-X492 only. *2KDC-MP438U/KDC-MP408U only.
*3KDC-MP338 only.
~
• Volume offset:
Sets
each source's
volume
as
a difference
from the basic volume.
• Loudness: Compensates for
low
and
high
tones
during
low
volume. (Only the
low
tone
is
compensated for
when
the
tuner
is
selected
as
a source.)
Dual
lone
System
Main source and sub source (Auxiliary input)
output
Front channel and
Rear
channel separately.
-
Set
up
the channel
of
sub source by "lONE2"
of
<Menu
System> (page
12).
- Select Main source by
[SRC]
button.
- Adjust
the
volume
of
Front channel by Control knob.
- Adjust the
volume
of
Rear
channel by <Audio Control>
(page
6)
or
[.~]I[T]
button
on the remote control
(page
15).
- The Audio Control
has
no
effect on sub source.
1
Select
the
source
to
adjust
Press
the
[SRC]
button.
2
Enter Audio Setup
mode
Press
the
Control knob for
at
least 1 second.
3
Select
the
Audio
Setup
item
to
adjust
Press
the
Control knob.
4
Adjust
the
Audio setup
item
Turn
the
Control knob.
S
Exit Audio Setup
mode
Press
the
Control knob for
at
least 1 second.
Speaker Setting
Fine-tuning
so
that the
System
Q
value
is
optimal
when
setting
the
speaker
type
as
follows;
11."""""_-
OFF
"SP
SEL
OFF"
For
5&4
in.
speaker
"SP
SEL
5/4"
For
6
&
6x9
in.
speaker
"SP
SEL
6*9/6"
For
the
OEM
speaker
"SP
SEL
OEM"
1
Enter Standby
Press
the
[SRC]
button.
Select
the
"STANDBY"
display.
2
Enter Speaker Setting
mode
Press
the
Control knob.
3
Select
the
Speaker
type
Turn
the
Control knob.
4
Exit Speaker Setting
mode
Press
the
Control knob.
English
I
7