Kenwood KDC-MP445U kdcx494 (pdf) - Page 18
iPod Settings, AUX Settings, Initial Settings, Demo Mode Settings, Skip Search, My Playlist Delete - amp
View all Kenwood KDC-MP445U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Function setting iPod Settings 25 Skip Search: "Skip Search" ➤ "0.5%", "1%", "5%", "10%" Sets the ratio of skip performed with (page 10). 26 My Playlist Delete: "My Playlist Delete" Deletes the songs registered in My Playlist. Turn the Control knob to select "YES" and then press the [ENTER] button to delete My Playlist. AUX Settings 27 Name Set: "Name Set" ➤ "AUX", "DVD", "PORTABLE", "GAME", "VIDEO", "TV" Sets the display when switched to AUX source. Initial Settings 28 Source Select Mode: "SRC Select" ➤ "1", "2" Sets the source selection method. 29 Beep: "Key Beep" ➤ "ON", "OFF" Setting the operation check sound (beep sound) ON/OFF. 30 Built in AUX: "Built-in AUX" ➤ "ON", "OFF" Sets whether to display AUX during source selection. 31 CD Read: "CD Read" ➤ "1", "2" Sets the method for reading CD. When unable to play special format CD, set this function to "2" to force playing. Note that some music CDs may be unplayable even when set to "2". In addition, audio files cannot be played when set to "2". Normally, keep this set to "1". 1 : Automatically distinguishes between audio file disc and music CD when playing disc. 2 : Forces playing as music CD. 32 Favorite Delete: "Favorite Delete" ➤ Preset No., "All" Deletes Favorite Preset Memory. Refer to (page 15). 33 Built in Amp setting: "Built-in AMP" ➤ "ON", "OFF" Selecting "OFF" turns off the built-in amplifier. Turning off the built-in amplifier improves the quality of the sound from Preout. 34 Speaker Select: "Speaker Select" ➤ "OFF", "5/4inch", "6x9/6inch", "O.E.M" Fine-tuning so that the System Q value is optimal when setting the speaker type as follows; Speaker type OFF For 5 & 4 in. speaker For 6 & 6x9 in. speaker For the OEM speaker Display "OFF" "5/4inch" "6x9/6inch" "O.E.M" 35 Firmware Upgrade: "F/W Update #.##" ➤ "USB", "CD" Upgrades the firmware. Selecting "YES" and then pressing [ENTER] button starts upgrading the firmware. For how to update the firmware, access our web site. http://www.kenwood.com/cs/ce/ Demo Mode Settings 36 Demo Mode: "DEMO Mode" ➤ "ON", "OFF" Specifies whether to enable demonstration. 18 | KDC-X494/ KDC-MP445U/ KMR-440U