Kenwood KDC-MP445U kdcx494 (pdf) - Page 28
Operation of hands-free phoning, Before Use, Receiving a call, Calling a number in the Phone Book
View all Kenwood KDC-MP445U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Function of KCA-BT200 (Optional Accessory) Operation of hands-free phoning Before Use • For details on the Bluetooth cell-phone with the hands-free function, see (page 40). • You need to register your cell-phone before using it with this unit. For more details, see (page 32). • If you have registered two or more cell-phones, you need to select one of them. For more details, see (page 34). • To use the Phone Book, it must be downloaded to this unit in advance. For details, see (page 33). Receiving a call Answering a Phone Call Press the [ENTER] button. ⁄ • The following operations disconnect the line: - Insering a CD. - Connecting a USB device. • The name of the calling party is displayed if it has already been registered in the Phone Book. Rejecting an Incoming Call Press the [SRC] button. Calling a number in the Phone Book 1 Enter Bluetooth mode Press the [FNC] button for at least 1 second. "BT MODE" is displayed. 2 Select the Name search mode Turn the Control knob to select "Name Search", and then press the [ENTER] button. 3 Enter the initial of name Operation type Select the characters. Move the character page. Operation Turn the Control knob. Push the Control knob towards up or down. 4 Search for the name Press the [ENTER] button. 5 Select the phone number Turn the Control knob. 28 | KDC-X494/ KDC-MP445U/ KMR-440U Pushing the Control knob towards right or left sorts the Phone Book by name. 6 Make a call Press the [ENTER] button. ⁄ • Pressing [S.MODE] button each time switches between name and telephone number. • During search, a non-accent character such as "u" is searched for instead of an accent character such as "ü". Dialing a number 1 Enter Bluetooth mode Press the [FNC] button for at least 1 second. "BT MODE" is displayed. 2 Select the Number dial mode Turn the Control knob to select "Number Dial", and then press the [ENTER] button. 3 Enter a phone number Turn the Control knob to select number, and then Push the Control knob towards right. 4 Make a call Press the [ENTER] button. To erase the entered phone number digit by digit: Push the Control knob towards left. ⁄ • You can input a maximum of 32 digits. Calling a number in the call log 1 Enter Bluetooth mode Press the [FNC] button for at least 1 second. "BT MODE" is displayed. 2 Select the call log mode Turn the Control knob to select "Incoming Calls", "Outgoing Calls", or "Missed Calls", and then press the [ENTER] button. "Incoming Calls": Incoming calls "Outgoing Calls": Outgoing calls "Missed Calls": Missed calls 3 Select a name or phone number Turn the Control knob.