Kenwood KDC-X302 Instruction Manual 1 - Page 29
F - HPF FRQ]
View all Kenwood KDC-X302 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
AUDIO SETTINGS BASS BOOST LEVEL1/LEVEL2/LEVEL3/LEVEL4/LEVEL5 or LV1/LV2/LV3/ LV4/LV5: Selects your preferred bass boost level. ; OFF: Cancels. LOUDNESS LEVEL1/LEVEL2 or LV1/LV2: Selects your preferred low and high frequencies boost to produce a well-balanced sound at a low volume level. ; OFF: Cancels. SUBWOOFER SET ON: Turns on the subwoofer output. ; OFF: Cancels. FADER R15 to F15 (0): Adjusts the rear and front speaker output balance. BALANCE L15 to R15 (0): Adjusts the left and right speaker output balance. VOLUME OFFSET -15 to +6 (0): Preset the initial volume level of each source. (Before adjustment, select the source you want to adjust.) SOUND EFFECT SOUND RECNSTR (Sound reconstruction) (Not applicable for RADIO source, AUX source and SIRIUS XM source.) ON: Creates realistic sound by compensating the high-frequency components and restoring the rise-time of the waveform that are lost in audio data compression. ; OFF: Cancels. SPACE ENHANCE (Not applicable for RADIO source.) SMALL/MEDIUM/LARGE or SML/MED/LRG: Virtually enhances the sound space. ; OFF: Cancels. SND REALIZER LEVEL1/LEVEL2/LEVEL3 or LV1/LV2/LV3: Virtually makes the sound more realistic. ; OFF: Cancels. STAGE EQ LOW/MIDDLE/HIGH or LOW/MID/HI: Virtually adjust the sound position heard from the speakers. ; OFF: Cancels. DRIVE EQ ON: Boosts the frequency to reduce the noise heard from outside the car or running noise of the tyres. ; OFF: Cancels. SPEAKER SIZE FRONT REAR SUBWOOFER X ' OVER TWEETER FRONT HPF The frequency and slope settings are automatically set for the crossover of the selected speaker. SIZE 3.5"/4"/4.75"/5"/6.5"/6.75"/7"/4×6/5×7/6×8/6×9/ 7×10: Selects according to the connected speaker size for optimum performance. TWEETER SMALL/MIDDLE/LARGE: Selects according to the size range of the connected tweeter for optimum performance. ; NONE: Not connected. 3.5"/4"/4.75"/5"/6.5"/6.75"/7"/4×6/5×7/6×8/6×9/7×10: Selects according to the connected speaker size for optimum performance. ; NONE: Not connected. 6.5"/8"/10"/12"/15" OVER: Selects according to the connected speaker size for optimum performance. ; NONE: Not connected. FRQ 1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/6.3KHZ/8KHZ/ 10KHZ/12.5KHZ: Adjusts the crossover frequency for the tweeter speaker. GAIN LEFT -8 to 0: Adjusts the output volume of the left tweeter. GAIN RIGHT -8 to 0: Adjusts the output volume of the right tweeter. F - HPF FRQ 30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ/ 120HZ/150HZ/180HZ/220HZ/250HZ: Adjusts the crossover frequency for the selected speakers (high pass filter). ; THROUGH: All signals are sent to the selected speakers. F - HPF SLOPE -6DB/-12DB/-18DB/-24DB: Adjusts the crossover slope. (Selectable only if a setting other than [THROUGH] is selected for [F - HPF FRQ].) F - HPF GAIN -8 to 0: Adjusts the output volume of the selected speaker. ENGLISH 25