Kenwood KDC-X302 Instruction Manual 1 - Page 32

DISPLAY SETTINGS LEARNING STEERING REMOTE CONTROL (for ) Default: XX DISPLAY COLOR SELECT*1 Select color for ALL ZONE, ZONE 1 and ZONE 2 separately. 1 Select a zone. (See the illustration on page 27.) 2 Select a color for the selected zone. INITIAL COLOR/VARIABLE SCAN/CUSTOM R/G/B/preset colors*2 Default: / / / : VARIABLE SCAN : INITIAL COLOR To make your own color, select [CUSTOM R/G/B]. The color you have made will be stored in [CUSTOM R/G/B]. 1 Press the volume knob to enter the detailed color adjustment. 2 Press S / T to select the color (R/G/B) to adjust. 3 Turn the volume knob to adjust the level (0 to 9), then press the knob. DIMMER Dim the illumination. ON: Dimmer is turned on. ; OFF: Cancels. DIMMER TIME: Set the dimmer on and off time. 1 Turn the volume knob to adjust the [ON] time, then press the knob. 2 Turn the volume knob to adjust the [OFF] time, then press the knob. (Default: [ON]: PM6:00 or 6:00PM; [OFF]: AM6:00 or 6:00AM) BRIGHTNESS 1 Select a zone. (See the illustration on page 27.) 2 0 to 31: Select your preferred brightness level for the selected zone. TEXT SCROLL AUTO/ONCE: Select whether to scroll the display information automatically, or scroll only once. ; OFF: Cancels. *1 For / / / / . *2 Preset colors: RED1/RED2/RED3/PURPLE1/PURPLE2/PURPLE3/PURPLE4/BLUE1/ BLUE2/BLUE3/SKYBLUE1/SKYBLUE2/LIGHTBLUE/AQUA1/AQUA2/GREEN1/ GREEN2/GREEN3/YELLOWGREEN1/YELLOWGREEN2/YELLOW/ORANGE1/ ORANGE2/ORANGERED You can control the unit with the steering remote control keys on your vehicle. After connection, you can configure the control keys according to your preference. • You can only make this configuration if your vehicle is equipped with the electrical steering remote control. • If the steering remote control in your car is not compatible, configuration may not be completed and an error message may appear. ( 29) Make the connection Steering remote cable (supplied) Gray/red Learning steering remote input terminal Rear panel Bright green/red Purple/red Connect to your vehicle's steering remote harness. Contact your KENWOOD dealer for details. Configure the control keys 1 Press repeatedly to enter STANDBY. 2 Press the volume knob to enter [FUNCTION]. 3 Turn the volume knob to select [SYSTEM], then press the knob. 4 Turn the volume knob to select [USER S.REMO], then press the knob. 5 Turn the volume knob to select [SET KEY], then press the knob. A key list of 16 assignable keys appears. • K## NONE: No function has been assigned. 6 Turn the volume knob to select any key from the key list to assign the function, then press the knob. "PRESS KEY TO ASSIGN K##" appears. 28 ENGLISH