Kenwood KDC-X302 Instruction Manual 1 - Page 40
How to remove the unit, Installing the unit in-dash mounting, When installing without the mounting,
View all Kenwood KDC-X302 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
INSTALLATION/CONNECTION Installing the unit (in-dash mounting) Do the required wiring. ( 37) Part list for installation (A) Faceplate Hook on the top side Orientate the trim plate as illustrated before fitting. Dashboard of your car Bend the appropriate tabs to hold the mounting sleeve firmly in place. (B) Trim plate (C) Mounting sleeve When installing without the mounting sleeve 1 Remove the mounting sleeve and trim plate from the unit. 2 Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with screws (supplied/commercially available). Use only the specified screws. Using wrong screws might damage the unit. How to remove the unit 1 Detach the faceplate. 2 Fit the catch pin on the extraction keys into the holes on both sides of the trim plate, then pull it out. 3 Insert the extraction keys deeply into the slots on each side, then follow the arrows as shown on the illustration. (D) Wiring harness (E) Extraction key (F) Screws (supplied for / ) 36 ENGLISH