Kenwood KDC-X794 Instruction Manual - Page 43

5 Exit Audio Control mode Press the [MENU] button for at least 1 second, and then press it again briefly. Car Type Fine Adjustments Adjusting fine tuning of the speaker position compensation value specified at (page 42). Display "Front" "Rear" "SW" Item Front speaker Rear speaker Subwoofer Range 0 - 14.44 feet 0 - 14.44 feet 0 - 14.44 feet ( : Factory setting) 1 Select the source Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed. Select a source other than "STANDBY". ✍✍SRC Select mode 2: Pressing the [SRC] button repeatedly switches source. 2 Enter Audio Control mode Press the [VOL] knob. 3 Enter Car Type Adjustment mode Turn the [VOL] knob and press it when the desired item is displayed. Select "Detailed Setup" > "Car Type Adjust". 4 Select the item you want to set Operation type Selects the item. Adjust each item. Set the value Operation Turn the [VOL] knob. Press the [4] or [¢] button. Press the [VOL] button. The settings of the delay time are automatically identified and compensated by specifying the distances of each speaker from the center of the vehicle interior. 1 Set the front and rear positions and the height of the reference point to the position of the ears of the person sitting in the front seat, and set the right and left positions to the center of the vehicle interior. 2 Measure the distances from the reference point to the speakers. 3 Calculate the distance difference in accordance with the farthest speaker. Reference point FRONT +3.2 feet 1.7 feet FRONT 2.6 feet REAR REAR 4.9 feet +2.3 feet +0 feet SUB-W 5 Exit Audio Control mode Press the [MENU] button for at least 1 second, and then press it again briefly. English | 43