Kenwood KDC-X794 Instruction Manual - Page 49
Registering Bluetooth device - firmware
UPC - 019048187741
View all Kenwood KDC-X794 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
"1s" - "99s" : Automatically answers the phone call after lapse of 1 - 99 seconds. ⁄ • If the time set in the cell-phone is shorter than that set in the unit, the former will be used. • This function does not work for call waiting. • "Bluetooth HF/Audio" (Setting up the Voice Output Speakers) Select the speaker which is further from the microphone in order to prevent howling or echoes. • "BT F/W Update" (Displaying the Firmware Version) Display the version of the firmware of this unit. For how to update the firmware, access our web site. http://www.kenwood.com/cs/ce/bt/ Registering Bluetooth device To make your Bluetooth device (cell-phone) usable with this unit, you need to register it (pairing). You can register up to 5 Bluetooth devices to this unit. Registering from this unit 1 Enter Bluetooth mode KDC-X994 KDC-BT945U Press the [ ] button. KDC-X794 KDC-MP745U Press the [PLAY MODE] button for at least 1 second. ✍✍You can also select from "Settings" in Menu List mode. 2 Enter Bluetooth device registration mode Turn the [VOL] knob and press it when the desired item is displayed. Select "BT Settings" > "Detailed Setup" > "Device Regist.". Search for the Bluetooth device. When search is completed, "Finished" is displayed. 3 Select a Bluetooth device Turn the [VOL] knob and press it when the desired item is displayed. 4 "Paring" is displayed (except KCA-BT200) If "Pairing Success" is displayed, proceed to step 7. If "PIN Code NG" is displayed, proceed to steps 5 to 6. 5 Input the PIN code Operation type Select the numbers. Move to the next digit. Delete the last digit. Operation Turn the [VOL] knob. Press the [¢] button. Press the [4] button. 6 Transmit the PIN code Press the [VOL] knob for at least 1 second. If "Pairing Success" is displayed, registration is completed. ✍✍If the error message appears even though the PIN code is correct, try . 7 Return to the device list Press the [MENU] button. 8 Exit BT Settings mode KDC-X994 KDC-BT945U Press the [ ] button. KDC-X794 KDC-MP745U Press the [PLAY MODE] button for at least 1 second. ⁄ • This unit allows up to eight digits to be input for a PIN code. If a PIN code cannot be input from this unit, it can be input from the Bluetooth device. • If there are 5 or more Bluetooth devices registered, you cannot register a new Bluetooth device. Registering Special Bluetooth device Allow registration of a special device that cannot be registered normally (pairing). 1. Select Special device registration mode Turn the [VOL] knob and press it when the desired item is displayed. Select "BT Settings" > "Detailed Setup" > "SPCL DVC Select". 2. Enter Special device registration mode Press the [VOL] knob for at least 1 second. A list is displayed. 3. Select a device name Turn the [VOL] knob and push the center when the desired device name is displayed. If "Completed" is displayed, registration is completed. 4. Go through the procedure step 3 of and complete the registration (pairing). Cancelling Special device registration mode Press the [MENU] button for at least 1 second. ⁄ • If the device name is not in the list, select "Other Phones". English | 49