Kenwood KDC-X991 Instruction Manual - Page 13
Position Control
UPC - 019048172228
View all Kenwood KDC-X991 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
4 Exit Sound Management mode Press the [FNC] button. Range 0.00 - 3.33 (feet) Position Control 1 Enter Position mode Using the Control knob, select "DSP" > "SND CONT" > "POSITION". For the operation method, refer to (page 11). 2 Select the Position item to adjust Turn the Control knob or push it towards left or right. Icon "PRESET" "MANUAL" Position Item Preset Position Manual Position 3 Enter the Position item Press the Control knob. 4 Adjust the Position item Preset Position Setting Push the Control knob towards right or left. Each time you push the knob, the setting alternates between the settings shown in the table below. Range All/ Front-Left/ Front-Right/ Front 5 Exit Position mode Press the [FNC] button. ⁄ • About the position setting First, set the using environment with "DTA" in (page 12). Preset position setting is for selecting the actual listening position. Manual position setting is for further adjustment of the position selected in preset position setting. This setting value can be memorized for each preset position. • When using the Subwoofer Left and Subwoofer Right as a single sub woofer, set the left side and right side to the same value. • Preset Position initial settings Preset Position Front Rear Subwoofer Left Right Left Right Left Right ALL 000000 Front-Left 0 1.17 0 1.17 0 0 Front-Right 1.17 0 1.17 0 0 0 Front 0 0 3.33 3.33 0 0 Manual Position Setting 1 Select the items to adjust for Position. Push the Control knob towards up or down. Display "L" "FRONT" "L" "REAR" "L" "SW" "FRONT" "R" "REAR" "R" "SW" "R" Position Item Front Left Rear Left Subwoofer Left Front Right Rear Right Subwoofer Right 2 Adjust the Position. Turn the Control knob or push it towards left or right. Each time you push the knob, the setting alternates between the settings shown in the table below. English | 13