Kenwood KDC-X991 Instruction Manual - Page 49

When LX AMP unit connecting AMP Control You can control the LX AMP connected to the unit. 1 Select AMP Control mode Turn the Control knob. Select the "AMS Control" display. 2 Enter AMP Control mode Press the Control knob for at least 1 second. 3 Select the AMP Control item for adjustment Push the Control knob towards up or down. ⁄ • For the details on the AMP Control item, see the Instruction manual attached to the LX AMP. 4 Adjust the AMP Control item Push the Control knob towards right or left. 5 Exit AMP Control mode Press the [FNC] button. ⁄ • You cannot use the LX AMP operation during standby mode. Other than Standby mode Traffic Information Switching to traffic information automatically when a traffic bulletin starts even when you are not listening to the radio. Display "TI : OFF" "TI : ON" Setting The Traffic Information function is OFF. The Traffic Information function is ON. When a traffic bulletin starts, "Traffic INFO" is displayed it and it switches to traffic information. ⁄ • During reception of an AM station when the Traffic Information function is turned ON, it switches to an FM station. • During reception of traffic information the adjusted volume is automatically remembered, and the next time it switches to traffic information it's automatically the remembered volume. Receiving other traffic information stations (In tuner source) Push the Control knob towards [4] or [¢]. ⁄ • You can change the traffic information station when listening to the radio. In FM reception CRSC (Clean Reception System Circuit) Temporarily have reception alternate from stereo to mono to reduce multi-path noise when listening to the FM station. Display "CRSC : ON" "CRSC : OFF" Setting The CRSC is ON. The CRSC is OFF. ⁄ • Strong electrical fields (such as from power lines) may cause unstable sound quality when CRSC is turned ON. In such a situation, turn it OFF. English | 49