Kenwood KDC-X991 Instruction Manual - Page 9
Volume, Attenuator, Loudness, Audio Control
UPC - 019048172228
View all Kenwood KDC-X991 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Volume Increasing Volume Turn the [VOL] knob clockwise. Decreasing Volume Turn the [VOL] knob counterclockwise. Attenuator Turning the volume down quickly. Press the [ATT] button. Each time you press the button, the Attenuator turns ON and OFF. When the Attenuator is ON, the "ATT" indicator blinks. Loudness Compensating for low and high tones during low volume. (Only the low tone is compensated for when the tuner is selected as a source.) 1 Enter Loudness mode Using the Control knob, select "DSP" > "SND CONT" > "LOUD". For the operation method, refer to (page 11). 2 Select the Loudness Turn the Control knob. Each time you push the knob, the Loudness turns ON and OFF. 3 Exit Loudness mode Press the Control knob. Audio Control 1 Select the source to adjust Press the [SRC] button. Refer to (page 8). 2 Enter Audio Control mode Press the [VOL] knob. 3 Select the Audio item to adjust Press the [VOL] knob. Each time you press the knob, the item to be adjusted alternates between the items shown in the table below. 4 Adjust the Audio item Turn the [VOL] knob. Adjustment Item Display Range Rear Volume "REAR VOLUME" 0 - 35 Subwoofer level "SUBWOOFER LEVEL" -15 - +15 Balance "BALANCE" Left 15 - Right 15 Fader "FADER" Rear 15 - Front 15 Exit Audio Control mode (Volume control mode) 5 Exit Audio Control mode Press any button. Press a button other than the [VOL] knob, [0] and [ATT] button. English | 9