Kenwood KDC-X991 Instruction Manual - Page 62

Troubleshooting Guide The messages shown below display your systems condition. Eject: • No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. • No CD in the unit. No Disc: No disc has been loaded in the disc magazine. TOC Error: • No disc has been loaded in the disc magazine. • The CD is quite dirty. The CD is upsidedown. The CD is scratched a lot. Read Error: • The number of files or folders which are stored in the connected USB device is above the limitation. • The file system of the connected USB device is broken. ➪ Copy the files and folders for the USB device again referring to http://www. kenwood.com/usb/. If the error message is still displayed, initialize the USB device or use other USB devices. Error 05: The disc is unreadable. Blank Disc: Nothing has been recorded on the MD. No Track: No tracks are recorded on the MD, although it has a title. No Panel: The faceplate of the slave unit being connected to this unit has been removed. Error 77: The unit is malfunctioning for some reason. ➪ Press the reset button on the unit. If the "Error 77" code does not disappear, consult your nearest service center. Mecha Error: Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason. ➪ Check the disc magazine. And then press the reset button on the unit. If the "Mecha Error" code does not disappear, consult your nearest service center. Hold Error: The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation. ➪ Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the disc will start playing again. No Name: Attempted to display DNPS during the CD play having no disc names preset. Waiting: • Radio text data is being received. Radio text plus requires more time to load than radio text. • Text for the Satellite Radio tuner source is being received. Load: Discs are being exchanged in the Disc changer. Checking: Reading: The unit is reading the data on the disc, USB device or Internal Memory. IN (Blink): The CD player section is not operating properly. ➪ Reinsert the CD. If the CD cannot be ejected or the display continues to flash even when the CD has been properly reinserted, please switch off the power and consult your nearest service center. Protect: The speaker wire has a short-circuit or touches the chassis of the vehicle, and then the protection function is activated. ➪ Wire or insulate the speaker cable properly and press the reset button. If the "Protect" code does not disappear, consult your nearest service center. Unsupported File: An Audio file is played with a format that this unit cannot support. Copy Protection: A copy-protected file is played. DEMO MODE: The Demonstration mode has been selected. ➪ The (page 53) is ON. Turn it OFF. 62 | English