Kenwood KDC-X993 Instruction Manual - Page 8

Function Control Category Item "SP Select"* "Call Beep"* "BT F/W Update"* "Beep" "Clock Adjust" "Date Adjust" "Date Mode" "SYNC" "DSI" "Illumi DIM" "ILM Effect"** "ILM MSC SYNC" "Display" "DISP DIM" "Contrast" "DISP N/P" "AMP" "Zone2" "AMS Control"** "TI"** "CRSC Receive Mode" "Tag Memory" "Tagging" "ESN=" "Name Set" "Scroll" "Favorite Delete" "Built in AUX" "CD Read" "DEMO Mode" Setting Entry "Front"*/ "F-R"/ "F-L" "ON"*/ "OFF" Setting overview Specify the voice output speaker. Condition Page * Output a beep from the speaker when a call comes in. * - 1 sec. Display the firmware version and update the firmware. 38 "OFF"/ "ON"* Setting the operation check sound (beep sound) ON/ - OFF. - 1 sec. Sets the clock. - 26 - 1 sec. Sets the date. 26 7 types 1 sec. Sets the date display mode. 26 "OFF"*/ "ON" Synchronizing the RDS station time data and this unit's - clock. "OFF"/ "ON"* DSI (Disabled System Indicator) of the unit blinks when - the faceplate is removed. "OFF"/ "AUTO"* Sets whether the illumination is dimmed in conjunction * / "MNAL1" / with the light switch of the vehicle or it is dimmed "MNAL2" constantly. "OFF"/ "ON"* Sets whether the key illumination color (KDC-X993/ - KDC-X693) or brightness (KDC-HD942U/ KDC-MP642U) is changed in conjunction with the key operation. "OFF"*/ "ON" Sets whether the key illumination color (KDC-X993/ -- KDC-X693) or brightness (KDC-HD942U/ KDC-MP642U) is changed in conjunction with the sound volume. "OFF"/ "ON"* Turns off the display when no operation is performed. - * "OFF"/ "AUTO"* Dims the display part in conjunction with the light * / "MNAL1" / switch of the vehicle. "MNAL2" "1" - "10" Adjusting the display contrast. - "POSI1"/ "2" Switches the panel display between positive or * / "NEGA1"/ "2" negative. "OFF"/ "ON"* Turns on/off the built-in amplifier. * "REAR"*/ "FRONT" - Specifies the destination of AUX input sound when the * Dual Zone function is turned on. Controls the connected LX amplifier. - 26 "OFF"*/ "ON" Switches to the traffic information automatically when - the traffic bulletin starts. "OFF"/ "ON"* Switches to Monaural to decrease noise when - reception is poor. "AUTO"*/ Sets the receive mode of HD Radio. * "DIGITAL"/ 1 sec. "ANALOG" "00"- "50" Displays the tag memory usage of HD Radio. Up to 50 19 tags can be registered to this unit. "0FF"/ "ON"* Turns ON / OFF the tag memory function of HD Radio. 19 - Displays the Electronic Serial Number of satellite radio. - - "Auto"*/ "Manual" - "OFF"*/ "ON" 1 sec. Sets the display when switched to AUX source. Specifies whether the text is scrolled automatically. 1 sec. Deletes Favorite Preset Memory. Sets whether to display AUX during source selection. 12 -- 34 - "1"*/ "2" Sets the CD read mode. * "OFF"/ "ON"* 2 sec. Specifies whether to enable demonstration. - 27 8 | KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U