Kenwood KDCMP332 Instruction Manual - Page 35
The messages shown below display your, systems condition.
View all Kenwood KDCMP332 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
The messages shown below display your systems condition. EJECT: No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. ➪ Load the disc magazine properly. No CD in the unit. ➪ Insert the CD. NO DISC: No disc has been loaded in the disc magazine. ➪ Load a disc into the disc magazine. TOC ERR: No disc has been loaded in the disc magazine. ➪ Load a disc into the disc magazine. The CD is quite dirty. The CD is upsidedown. The CD is scratched a lot. ➪ Clean the CD and load it correctly. E-05: The CD is upside-down. ➪ Load the CD correctly. BLANK: Nothing has been recorded on the MD. NO TRACK: No tracks are recorded on the MD, although it has a title. E-15: Media was played that doesn't have data recorded that the unit can play. ➪ Use media that has data recorded that the unit can play. NO PANEL: The faceplate of the slave unit being connected to this unit has been removed. ➪ Replace it. E-77: The unit is malfunctioning for some reason. ➪ Press the reset button on the unit. If the "E-77" code does not disappear, consult your nearest service center. E-99: Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason. ➪ Check the disc magazine. And then press the reset button on the unit. If the "E-99" code does not disappear, consult your nearest service center. HOLD: The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation. ➪ Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the disc will start playing again. LOAD: Discs are being exchanged in the Disc changer. READING: The unit is reading the data on the disc. IN (Blink): The CD player section is not operating properly. ➪ Reinsert the CD. If the CD cannot be ejected or the display continues to flash even when the CD has been properly reinserted, please switch off the power and consult your nearest service center. PROTECT: The speaker wire has a short-circuit or touches the chassis of the vehicle, and then the protection function is activated. ➪ Wire or insulate the speaker cable properly and press the reset button. NA FILE: An Audio file is played with a format that this unit can't support. ➪ ---- COPY PRO: A copy-protected file is played. ➪ ---- DEMO MODE: The Demonstration mode has been selected. ➪ The (page 24) is ON. Turn it OFF. English | 35