Kenwood KMM-BT306 Instruction Manual - Page 15
Change the crossover type, CAUTION - firmware
View all Kenwood KMM-BT306 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Getting Started [P-OFF WAIT] Applicable only when the demonstration mode is turned off. Sets the duration when the unit will automatically turn off (while in standby mode) to save the battery. [20M]: 20 minutes ; [40M]: 40 minutes ; [60M]: 60 minutes ; [- - -]: Cancels [F/W UPDATE] [UPDATE SYSTEM] [F/W UP xxxx] [YES]: Starts upgrading the firmware. ; [NO]: Cancels (upgrading is not activated). For details on how to update the firmware, visit . [FACTORY RESET] [YES]: Resets the settings to default (except the stored station). ; [NO]: Cancels. [ENGLISH] ESPANOL] [FRANCAIS] Select the display language for [FUNCTION] menu and music information if applicable. By default, [ENGLISH] is selected. [DEUTSCH] Change the crossover type 1 Press B SRC repeatedly to enter STANDBY. 2 Press and hold number buttons 4 and 5 to enter crossover select. The current crossover type appears. 3 Turn the volume knob to select "2WAY" or "3WAY", then press the knob. 4 Turn the volume knob to select "YES" or "NO", then press the knob. The selected crossover type appears. • To cancel, press and hold . • To adjust the selected crossover settings, see page 24. CAUTION Select a crossover type according to how the speakers are connected. (Page 31, 32) If you select a wrong type: • The speakers may damage. • The output sound level may be extremely high or low. ENGLISH 7