Kenwood KMM-BT306 Instruction Manual - Page 40
References
![]() |
View all Kenwood KMM-BT306 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Installation/Connection References Connect external components No Part 1 Microphone input jack (Page 15) 2 Output terminals (See the following "Connect external amplifiers via output terminals".) Connect external amplifiers via output terminals When connecting an external amplifier to the output terminals of this unit, securely connect the amplifier ground wire to the car chassis to prevent damage to the unit. Model Output terminals 2-way crossover / REAR: Rear output FRONT: Front output SW: Subwoofer output 3-way crossover Tweeter output Mid Range output Woofer output REAR/SW: Rear/subwoofer output Woofer output Maintenance Cleaning the unit Wipe off dirt on the faceplate with a dry silicone or soft cloth. Cleaning the connector Detach the faceplate and clean the connector gently with a cotton swab. Be careful not to damage the connector. Connector (on the reverse side of the faceplate) More information For: - Latest firmware updates and latest compatible item list - KENWOOD original application - Any other latest information Visit . Playable files • For USB mass storage class device: MP3 (.mp3), WMA (.wma), AAC (.aac), AAC (.m4a), WAV (.wav), FLAC (.flac) • Playable USB device file system: FAT12, FAT16, FAT32 Even when audio files comply with the standards listed above, playback may be impossible depending on the types or conditions of media or devices. • For detailed information and notes about the playable audio files, visit . About USB devices • You cannot connect a USB device via a USB hub. • Connecting a cable whose total length is longer than 5 m may result in abnormal playback. • This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1.5 A. 32 ENGLISH
![](/manual_guide/products/kenwood-kmmbt206-instruction-manual-f8ab716/40.png)