Kenwood KMR-D375BT Instruction Manual - Page 22

BLUETOOTH® Auto Pairing When you connect iPhone/iPod touch to the USB input terminal, pairing request (via Bluetooth) is automatically activated. Press the volume knob to pair once you have confirmed the device name. Automatic pairing request is activated only if: - Bluetooth function of the connected device is turned on. - [AUTO PAIRING] is set to [ON]. (Page 21) BLUETOOTH - Mobile phone Receive a call When there is an incoming call: • / / / : ZONE 2 illuminates in green color and flashes. • The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. (Page 19) During a call: • / / / : ZONE 1 illuminates according to the settings made for [DISPLAY] (page 29) and ZONE 2 illuminates in green color. • If you turn off the unit or detach the faceplate, Bluetooth is disconnected. The following operations may differ or be unavailable depending on the connected phone. To On the faceplate On the remote control First incoming call... Answer a call Press or the volume knob or one of the number buttons (1 to 6). Press . Reject a call Press . Press . End a call Press . Press . While talking on the first incoming call... Answer another incoming call and hold the current call Press . Press . Reject another incoming Press . call Press . While having two active calls... End current call and activate held call Press . Press . Swap between the Press . current call and held call Press . Adjust the phone volume*1 [00] to [35] (Default: [15]) Turn the volume knob during a call. Press VOL *2 or VOL during a call. Switch between handsfree and private talk modes*3 Press 6 IW during a call. ( Not available ) *1, *2, *3: See page 19. 18 ENGLISH