Kenwood KMR-M332BT Instruction Manual - Page 35
Installing the unit without mounting sleeve, Removing the unit, Connect external components
View all Kenwood KMR-M332BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Installation/Connection Installing the unit (without mounting sleeve) 1 Remove the mounting sleeve and trim plate from the unit. 2 Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with screws (supplied/commercially available). Connect external components Use only the specified screws. Using wrong screws might damage the unit. Removing the unit 1 Detach the faceplate. 2 Remove the trim plate. 3 Insert the extraction keys deeply into the slots on each side, then follow the arrows as shown on the illustration. No Part 1 For : To KENWOOD Marine Remote Control unit, KCA-RC55MR (optional accessory) (Page 7) 2 For : MIC (Microphone input terminal) (Page 16) 3 For : Expansion port (12 V 500 mA): To the optional SiriusXM Vehicle Tuner (commercially available) (Page 12) 4 For / / : Microphone input jack (Page 16) 5 Output terminals (See "Connect external amplifiers via output terminals" on page 31.) ENGLISH 29