Kenwood KMR-M332BT Instruction Manual - Page 39
Troubleshooting
View all Kenwood KMR-M332BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
References For / : Each time you press DISP, the display information changes. • If the information is unavailable or not recorded, "NO TEXT", "NO INFO", or other information (eg. station name) appears or display will be blank. Main display Source name Display information: Main display STANDBY Source name/Clock Clock back to the beginning RADIO Source name/Clock Frequency Clock back to the beginning For FM Radio Broadcast Data System stations only: Source name/Clock Station name/Program type Radio text Radio text+ Radio text+ song title/Radio text+ artist Frequency Clock back to the beginning USB For MP3/WMA/AAC/WAV/FLAC files: Source name/Clock Song title/Artist Album title/Artist Folder name File name Playing time Clock back to the beginning iPod USB/iPod BT Source name/Clock Song title/Artist Album title/Artist Playing time Clock back to the beginning BT AUDIO Source name/Clock Song title/Artist Album title/Artist Playing time Clock back to the beginning AUX Source name/Clock Clock back to the beginning Troubleshooting Symptom Remedy Sound cannot be heard. • Adjust the volume to the optimum level. • Check the cords and connections. "MISWIRING CHECK WIRING THEN PWR ON" appears. Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again. "PROTECTING SEND SERVICE" Send the unit to the nearest service center. appears. Source cannot be selected. Check the [SOURCE SELECT] setting. (Page 6) General • Sound cannot be heard. • The unit does not turn on. • Information shown on the display is incorrect. Clean the connectors. (Page 31) The unit does not work at all. Reset the unit. (Page 4) Correct characters are not displayed. • This unit can only display uppercase letters, numbers, and a limited number of symbols. • Depending on the display language you have selected (page 7), some characters may not be displayed correctly. For : "SET ERROR"/"DEL ERROR" Setting/deleting the remote control ID is unsuccessful. Turn the power off, then turn on the power and perform the operation again. (Page 7) Radio • Radio reception is poor. • Static noise while listening to the radio. Connect the antenna firmly. ENGLISH 33