Kenwood KMR-M332BT Instruction Manual - Page 37
References
View all Kenwood KMR-M332BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Installation/Connection Connect external amplifiers via output terminals When connecting an external amplifier to the output terminals of this unit, securely connect the amplifier ground wire to the car chassis to prevent damage to the unit. Model / / Output terminals REAR: FRONT: SW: REAR/SW: Rear output Front output Subwoofer output Rear/subwoofer output References Maintenance Cleaning the unit Wipe off dirt on the faceplate with a dry silicone or soft cloth. Cleaning the connector Detach the faceplate and clean the connector gently with a cotton swab. Be careful not to damage the connector. Connector (on the reverse side of the faceplate) More information For: - Latest firmware updates and latest compatible item list - KENWOOD original application - Any other latest information Visit . Playable files • USB mass storage class device: Playable audio file: MP3 (.mp3), WMA (.wma), AAC (.aac), AAC (.m4a), WAV (.wav), FLAC (.flac) Playable file system: FAT12, FAT16, FAT32 Even when audio files comply with the standards listed above, playback may be impossible depending on the types or conditions of media or devices. • For detailed information and notes about the playable audio files, visit . About USB devices • You cannot connect a USB device via a USB hub. • Connecting a cable whose total length is longer than 5 m may result in abnormal playback. • This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1.5 A. ENGLISH 31