Kenwood KTC-HR200 Instruction Manual - Page 4

Operations -CD Receiver- Tuning Selecting the station. 1 Select HD Radio source Press the [SRC] button. Select the "HD Radio"j"HD RADIO" display. 2 Select the HD FM band Press the [FM] button. Each time the (FM] button is pressed it switches between the HF1, HF2, and HF3 bands. Select the HD AM band Press the [AM] button. 3 Tune up or down program Press the [~] or [~] button. If the sub channel is available in Digital FM broadcast when is set to Auto seek or Manual, the channel can be switched. Example: [I....] t 81 Analog FM G) Analog FM 8 - - Digital FM 0 Analog FM Digital FM-l ch @ Digital FM-2ch CD Digital FM-8ch @> [~] t Digital FM @ (HD FM band) .' Aura leek or Manual .' Auto mode • During the reception of CD, tune up: (I)-@-@ ... • During the reception of@, tune down: @-® ... ~ ~ Using the modes can be switched to digital broadcast automatic switching, analog broadcast only, or digital broadcast only When "Digital" has been set with , the seek time will be longer to allow a check of whether the transmission is a digital broadcast. It will take few seconds to receive the digital broadcasting after selecting the frequency. When Tune up button is pressed, it will switch to the next frequency if is it switched before receiving the Digital broadcasting. (8-0) When Tune down button is pressed, it will be received from Analog broadcasting if the Digital broadcasting has never been received. (@-O) When is set to "Manual", the frequency will be switched while pressing [~] or [~] buttons. Some of the models have the following displays when the Main channel and Sub channel are switched - "Main"/"Primary"/"PRI": When it is switched to the Main channel En-4 I KTC-HR200 - "Sub"/"Secondary"/"SEC: When it is switched to Sub channel Tuning Mode Sets the tuning mode. Press the [AUTO] button. Each time the button is pressed the Tuning mode switches as shown below.