Kenwood KTC-HR200 Instruction Manual - Page 6
Memory, Entry, Switching, Display
UPC - 019048178886
View all Kenwood KTC-HR200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Operations -CD Receiver- Auto Memory Entry Putting a station with good reception in the memory automatically. 1 Select the band for Auto Memory Entry Press the [FM] or [AM] button. 2 Open Auto Memory Entry Press the [AME] button for at least 2 seconds. Save six stations with the best reception in the memory and close Auto Memory Entry. b\ ~ • Sub channel of Digital FM cannot be registered. En-6 I KTC-HR200 Switching Display When you are listening to an HD Radio station, you can switch over the display information as follows. For operations, see the / / page of the instruction manual of your control unit. b\ ~ . What is displayed may partly depend on control unit to be connected. HD Radio mode Station Name (8) "Station Name"/ "NAME"/ "ST NAME" Song title/ Artist name/ Album name/ "Title"/ "TITLE" Genre/ Detailed station name (128) Receive Frequency "Frequency"/ "FREQ" The number in the ( ) indicates the maximum number of displayed characters. When a current receiving station dose not send text information, the frequency is displayed. The Station name or Song title during reception of the Digital FM broadcasting displays the channel information as follows. - (DDigital AM "(Station name) HD" "(Song title! Artist name I)" - (DDigital FM "(Station name) HD" "(Song title! Artist name I)" ~ (IlDigital FM-l @Digital FM-2 : "(Station name) HD1" "(Song title! Artist name I)" "(Station name) HDt "(Song title/ Arlist name I)" CD: When the Main channel is received 0: The sub channel is available in Main channel which is received. @: When the Sub channel is received • When listening by the Analog sound, "HD" display switches to "FM" or "AM". b\ ~ In HD Radio mode, the display of Station Name or Song title should be set up. The channel information cannot be displayed in the Frequency display. Though some models have two or more lines in the display, you cannot display the same information in both the Upper Part and the Lower Part In the control unit with PIS indicator, the indicator will be turned ON or OFF as described below. - CD MIS, PIS indicator is OFF - @ MIS, PIS indicator is ON. - @: MIS, PIS indicator blinks.