Kenwood KVT911DVD Instruction Manual - Page 30

FM/AM Tuner Control Function V V O O L L V.SEL DISC/BAND SCREEN ATT SOURCE TI EJECT A B C B Turning TI function On/Off You can listen to traffic information. If you are listening to discs, they will continue playing until a traffic bulletin is broadcast. Press the [ TI ] button to turn the function on and off. When the function is on, the TI indicator is displayed. When a traffic bulletin begins to be broadcast, "Traffic Information" will be displayed. If you are listening to a tape or disc when a traffic bulletin begins, they will automatically be turned off. When the bulletin ends or poor reception is experienced, the tape or disc will begin playing again. C Seeking to a Different Traffic Information Station Use the [ 4 ] / [ ¢ ] to make an auto seek of the TI stations in a certain band. NOTE When you are listening to a disc, you cannot change to another TI station. A Presetting the Volume for Traffic Information B Preset the volume level to be used for traffic information and news broadcasts. 1 Tune into the station for which you want to set the volume. 2 Adjust the volume to the desired level. 3 Hold down the TI button for two seconds or more. Future traffic information/news broadcasts are heard at the preset level. NOTE • The volume cannot be lowered by this function during tuner reception. The volume is only set when it is louder than the listening volume of the tuner. • You can arrange only to listen to traffic information or news bulletins with at preset volume with the volume set at minimum. 30