Kenwood KVT911DVD Instruction Manual - Page 49
GA AB BF DE EC FG CD
![]() |
UPC - 019048139603
View all Kenwood KVT911DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Channel Level Setting Screen A B C DE F G Setting the Channel Balance This item allows you to adjust the output level of each type of speaker using the built-in test signal.The output level must be adjusted from the listening position.The factory setup is "0 dB" for all types of speakers. C Test Signal This item allows you to output the built-in test signal from the speakers. Use the test signal for setting the balance between channels. Each time you touch [ Noise ] to switch the test signal function on and off. A Adjusting the Front Left Speaker Each time you touch [ ] or [ ] to adjust the front left output level. B Adjusting the Front Right Speaker Each time you touch [ ] or [ ] to adjust the front right output level. D Adjusting the Rear Left Speaker Each time you touch [ ] or [ ] to adjust the rear left output level. NOTE You cannot operate when the "Multi channel" is set to "3/0" or "2/0" ( see P 47 ) . F Adjusting the Rear Right Speaker Each time you touch [ ] or [ ] to adjust the rear right output level. NOTE You cannot operate when the "Multi channel" is set to "3/0" or "2/0" ( see P 47 ) . E Adjusting the Center Speaker Each time you touch [ ] or [ ] to adjust the center output level. NOTE •You cannot operate when the "Center SP" is set to "OFF" ( see P 47 ) . •You cannot operate when the "Multi channel" is set to "2/2" or "2/0" ( see P 47 ). G Returning to the Sound Effect Menu Screen Touch [ RTN ] to return to the sound effect menu screen. 49
![](/manual_guide/products/kenwood-kvt911dvd-instruction-manual-5a6e295/49.png)