Kenwood KVT911DVD Instruction Manual - Page 52

5.1 Channels Surround Processor Control Function Parametric Equalizer Screen A1 A2 A3 A4 B C D E F G H A Selecting the Adjust Band Touch the each box to select the band. B Adjusting the Center Frequency • Each time you touch [ increased. • Each time you touch [ decreased. ], the frequency is ] , the frequency is A1: 60Hz/ 80Hz/ 100Hz/ 120Hz/ 160Hz/ 200Hz/ 250Hz A2: 315Hz/ 400Hz/ 500Hz/ 630Hz/ 800Hz/ 1kHz A3: 1.25kHz/ 1.6kHz/ 2kHz/ 2.5kHz/ 3.15kHz/ 4kHz A4: 5kHz/ 6.3kHz/ 8kHz/ 10kHz/ 12.5kHz/ 16kHz C Adjusting the Quality Factor Each time you touch [ ] or [ ] to switch the Bass quality factor as follows: 1(0.25) / 2(0.5)/ 3(1.0) /4(2.0) D Adjusting the Gain • Each time you touch [ • Each time you touch [ decreased. ], the gain is increased. ], the gain is E Setting the Speaker Type Using this function to set the diameter of the speaker optimizes the sound quality to the speaker diameter. Each time you touch [ 2 ] or [ 3 ] to switch the speaker type as follows: " STANDARD " Speaker with a general diameter " NARROW " Speaker with small diameter " WIDE " Woofer with a large diameter " MIDDLE " Woofer with a small diameter F Recalling the Kenwood Preset Sound Each time you touch [ 2 ] or [ 3 ] , the preset sound setting switches between the "FLAT", "POPS"(TOP40), "ROCK", "DANCE", "VOCAL" and "CLASSIC". G Storing Your Sound Settings Touch a [ 1 ] - [ 3 ] that you want to use for the equalizer curve for at least two seconds. Recalling Your Sound Settings Touch a [ 1 ] - [ 3 ] for the desired equalizer curve. H Returning to the Sound Effect Menu Screen Touch [ RTN ] to return to the sound effect menu screen. 52