Kenwood PKT-23 Operation Manual 1 - Page 22
Channel Setup Mode
![]() |
View all Kenwood PKT-23 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
CHANNEL SETUP MODE This transceiver allows you to reprogram each of the channels with different frequencies and QT (Quiet Talk)/ DQT (Digital Quiet Talk) settings. The table below lists the default channel settings. Channel Number 1 2 3 4 Table Number 2 8 9 10 Frequency 464.5500 MHz 467.9250 MHz 461.0375 MHz 461.0625 MHz QT/DQT Setting 67.0 Hz 67.0 Hz 67.0 Hz 67.0 Hz OPERATING FREQUENCY AND QT/ DQT SETTING To change the operating frequency of a channel: 1 With the transceiver power OFF, press and hold the PTT switch and Up key while turning the transceiver power ON. • Continue to hold the Power switch, PTT switch, and Up key until the LED indicator lights yellow and the transceiver announces "Self". 2 Release the Power switch, PTT switch and Up key. • The transceiver announces "Channel Number". 3 Press the Up/Down key to select your desired channel, then press the PTT switch to confirm the selected channel. • Upon releasing the PTT switch, a beep will sound and the transceiver announces "Table Zero". 4 Press the Up/Down key to increment/ decrement the Table number, to select the new channel frequency. • Press and hold the Up/Down key to continuously increment/ decrement the number. • Table numbers and their corresponding operating frequencies are provided in the tables on pages 13 and 14. • A voice announcement will inform you of the selected Table number. 12
![](/manual_guide/products/kenwood-pkt23-operation-manual-199e4d4/22.png)