Kenwood TK-2300-V4P Instruction Manual - Page 18
Basic Operations - how to program
UPC - 019048185280
View all Kenwood TK-2300-V4P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
BASIC OPERATIONS 1 Turn the Power switch/ Volume control clockwise to switch the transceiver power ON. • A beep sounds. 2 Rotate the Channel selector to select your desired channel. • When you receive an appropriate signal, you will hear audio from the speaker. Adjust the volume as necessary. 3 To make a call, press and hold the PTT switch, then speak into the microphone using your normal speaking voice. • Hold the microphone approximately 1.5 inches (3 to 4 cm) from your lips. 4 Release the PTT switch to receive. Note: When the battery pack voltage becomes too low, the Low Battery Warning sounds an alert tone every 30 seconds and the LED indicator blinks red. LED Indicator Status Indicator Color Lights red Lights green Blinks red Blinks green Meaning Transmitting Receiving a call Battery power is low while transmitting Scanning Blinks red/orange The selected channel has not been programmed and cannot be used.