Kenwood TK-2300-V4P Instruction Manual - Page 33

■ Scan Scan is useful for monitoring signals on the transceiver channels. When scanning, the transceiver checks for a signal on each channel and only stops if a signal is present. If the QT/DQT matches, the transceiver stops at the channel and opens the squelch so you can listen to the call. If the QT/DQT does not match, the call is ignored and scanning continues. ■ Scan + Temporary Delete (Side 2 key default) Press this key to start scanning the transceiver channels. When Scan pauses at an undesired channel, you can remove that channel from the scanning sequence by pressing and holding this key for 3 seconds. ■ Scrambler Press this key to activate (a single beep sounds) and deactivate (a double beep sounds) the scrambler function of the selected channel. The Scrambler function allows you to hold a conversation in complete privacy. When the Scrambler function is activated, any other party that is listening to your channel will be unable to understand your conversation. ■ Squelch Off Press this key to hear background noise. Press the key again to return to normal operation. ■ Squelch Off Momentary Press and hold this key to hear background noise. Release the key to return to normal operation. ■ Temporary Delete When Scan pauses at an undesired channel, you can remove that channel from the scanning sequence by pressing and holding this key for 1 second. 23