Kenwood TK-2300-V4P Instruction Manual - Page 23
Channel Operating Frequencies
UPC - 019048185280
View all Kenwood TK-2300-V4P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
CHANNEL OPERATING FREQUENCIES To change the operating frequency of a channel: 1 With the transceiver power OFF, press and hold the PTT switch and Side 1 key while turning the transceiver power ON. • Continue to hold the PTT switch and Side 1 key until the LED lights orange and the transceiver announces "Self". 2 Release the PTT switch and Side 1 key. • The transceiver announces "Channel". • Pressing the Side 1 key or Side 2 key will toggle between QT, DQT, and Channel setup. 3 Press and release the PTT switch, then rotate the Channel selector to your desired channel. • Upon pressing and releasing the PTT switch, a beep will sound and the transceiver announces "Table zero". 4 Press the Side 1 or Side 2 key to increment/ decrement the Table number, to select the new channel frequency. • Press and hold the Side 1 or Side 2 key to increment/ decrement the number by 5 at a time. • Table numbers and their corresponding operating frequencies are provided in the table on page 14. • A voice announcement will inform you of the currently selected Table number. 5 Press the PTT switch to save the setting. • A beep will sound. • Repeat steps 3 to 5 to set up another channel. 6 Turn the transceiver power OFF and then ON again to activate the new settings. Note: The transceiver will automatically return to normal operation if no action is performed for 5 seconds. 13