Kenwood TK-2300-V4P Instruction Manual - Page 35

TROUBLESHOOTING GUIDE Problem Solution Cannot turn the transceiver power ON. • The battery pack may be dead. Recharge or replace the battery pack. • The battery pack may not be installed correctly. Remove the battery pack and install again. Battery power dies shortly • after charging. The battery pack life is finished. Replace the battery pack with a new one. Cannot talk to or hear other members in your group. • Make sure you are using the same frequency and QT/DQT settings as the other members in your group. • Other group members may be using the Scrambler function. Turn on your transceiver's Scrambler. • Other group members may be too far away. Make sure you are within range of the other transceivers. Other voices (besides group members') are present on the channel. • Change the QT/DQT settings. Make sure all group members change the settings on their transceivers to match the new QT/DQT setting. 25