Kenwood TK 3230 Instruction Manual - Page 37
Elcall, Elective, Alling
UPC - 019048173591
View all Kenwood TK 3230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Selcall (Selective Calling) A Selcall is a voice call to a particular station or group of stations. Each transceiver is set up with an individual ID number for use with selcalls. n Making a Selcall 1 Press the CAL key. 2 Press the or key to select an ID number. • "Id" represents a single station, "GP" represents a group of stations, and "AL" represents all stations. 3 Press the PTT switch to transmit the selected selcall ID. • The transceiver waits for the Data Transmit Modulation Delay time {page 29} before transmitting the selcall ID. • The side tone sounds if PTT ID side tone {page 30} is enabled. 4 Release the PTT switch, then continue the call as normal when you receive a response. 5 Press the CAL key to end the call. Note: If Optional Signalling (menu "oP") has been set to "FS" (FleetSync), you can also set up an Individual Selcall Alert type (menu "IA") and Group Selcall Alert type (menu "GA"). Individual and Group Selcall Alert types range from "-oF" (off) and "- 1" (type 1) to "-10" (type 10). Refer to the menu list on page 45. 28