Kenwood TK 3230 Instruction Manual - Page 39
of transmission
UPC - 019048173591
View all Kenwood TK 3230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
n PTT ID The transceiver can send a PTT ID signal when pressing the PTT switch (beginning of transmission) or when pressing and releasing (beginning of transmission and end of transmission) the PTT switch. 1 With the transceiver power OFF, press and hold the MENU key while turning the transceiver power ON (for 1 second). 2 Press the or key to select "Pt". 3 Press the MENU key then press or to select "Pt-oF" (PTT ID is off), "Pt-bo" (send your own PTT ID at the beginning of transmission), or "Pt-LI" (send the list PTT ID at the beginning and end of transmission). 4 Press the MENU key to confirm the selection. 5 Press the PTT, MON, or CAL key to exit Setting Mode. n PTT ID Side Tone When the PTT switch is pressed and/or released, a tone will sound through your own speaker when the PTT ID is transmitted. To turn the PTT ID Side Tone on or off: 1 With the transceiver power OFF, press and hold the MENU key while turning the transceiver power ON (for 1 second). 30