Kenwood TK-3710 User Manual 1 - Page 22
Battery Status, PF Button, Menu Mode
View all Kenwood TK-3710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Battery Status Allows you to check the battery power status. PF Button: Press the programmed button, the Battery Status function operates. Menu Mode: Select "BAT STAT" and press the [ S ] button, the Battery Status function operates. Battery status is represented by the number of times the LED indicator flashes red. Four flashes represents full power, three represents medium power, two represents low power, and one represents very low power. If the LED flashes red only one time, recharge or replace your battery pack immediately. Indicator Battery remaining LED Beep tone Full Blink 4 times Sounds 4 times Sufficient Blink 3 times Sounds 3 times Low Blink 2 times Sounds 2 times Very Low Blink 1 time Sounds 1 time • When the Low Battery Warning function is active {p. 48} and the battery power is low or less, this button will not operate. • If the Battery Level Tone has been enabled, a beep tone will sound according to the number of flashes from the LED. 22