Kenwood TK-3710 User Manual 1 - Page 46

Voice Operated Transmission (vox), Vox Type, Vox Operation

Get Kenwood TK-3710 PDF manuals and user guides View all Kenwood TK-3710 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

VOICE OPERATED TRANSMISSION (VOX) VOX (VOX/ Semi-VOX) operation allows you to transmit hands-free. This feature can be activated or deactivated by your dealer. To operate VOX, you must use an optional headset. VOX Type VOX: When the voice level to the microphone is higher than the reference level (VOX Gain Level), the transceiver automatically starts transmission. Semi-VOX: Transmission is started by pressing PTT switch and transmission continues while speaking even after PTT switch is released. The Semi-VOX function is effective in the following cases. • Incorrect transmission due to noise. • Voice at start of transmission is interrupted. VOX Operation 1 Connect a headset to the transceiver. • The VOX function does not activate when a headset is not connected to the accessory terminal of the transceiver. 2 Press the button programmed as [VOX Function]. • Alternatively, you can press the button programmed as [Menu] to enter VOX Mode using the Menu Mode. • Beep A (1 beep) sounds and the " " indicator appears on the display. 3 To transmit, simply speak to the microphone. 4 When you finish speaking, transmission ends. To turn the VOX function OFF, press the button programmed as [VOX Function] button again. • Beep B (2 beeps) sounds and the " " indicator will disappear from the display. Note: ◆ The VOX Gain Level is set to a sensitive level, signal received with loud volume may cause the transceiver to transmit. 46

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
46
VOICE OPERATED TRANSMISSION (VOX)
VOX (VOX/ Semi-VOX) operation allows you to transmit hands-free. This feature
can be activated or deactivated by your dealer. To operate VOX, you must use an
optional headset.
VOX Type
VOX:
When the voice level to the microphone is higher than the reference level
(VOX Gain Level), the transceiver automatically starts transmission.
Semi-VOX:
Transmission is started by pressing
PTT
switch and transmission
continues while speaking even after
PTT
switch is released.
The Semi-VOX function is effective in the following cases.
•
Incorrect transmission due to noise.
•
Voice at start of transmission is interrupted.
VOX Operation
1
Connect a headset to the transceiver.
•
The VOX function does not activate when a headset is not connected to
the accessory terminal of the transceiver.
2
Press the button programmed as
[VOX Function]
.
•
Alternatively, you can press the button programmed as
[Menu]
to enter
VOX Mode using the Menu Mode.
•
Beep A (1 beep) sounds and the “
” indicator appears on the display.
3
To transmit, simply speak to the microphone.
4
When you finish speaking, transmission ends.
To turn the VOX function OFF, press the button programmed as
[VOX Function]
button again.
•
Beep B (2 beeps) sounds and the “
” indicator will disappear from the
display.
Note:
◆
The VOX Gain Level is set to a sensitive level, signal received with loud volume
may cause the transceiver to transmit.