Kenwood TM-281A User Manual - Page 18
Displays the Menu No., Memory Channel number,
View all Kenwood TM-281A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
6 Appears when the Automatic Simplex Check (ASC) function is activated {page 26}. 7 Appears when the Priority Scan function is activated {page 42}. 8 "WX" is not used on this transceiver. 9 Appears when narrow FM Mode is selected {page 58}. 10 Displays the frequencies, Menu settings, Memory name and other information. 11 Displays the Menu No., Memory Channel number, and status {pages 18, 29}. 12 Appears when the displayed Memory Channel has data {page 29}. 13 Appears when the Key Lock function is ON {page 56}. 14 Appears when the Memory Channel Lockout function is ON {page 42}. 15 Shows the strength of transmitted {page 15} and received {page 52} signals. 3 indicates the squelch is open and the frequency is "busy". It also appears when the squelch is set to minimum {page 14}. If using CTCSS or DCS, it indicates the squelch is open due to a received signal that contains the same CTCSS tone or DCS code that is set in your transceiver. acts as an S-meter while receiving and an RF power meter while transmitting. indicates the transceiver is transmitting. 16 Appears when the function key is pressed. 17 H appears when high power transmission is selected and L appears when low power is selected {page 15}. ("M" is not used on this transceiver.) 11