Kenwood TM-281A User Manual - Page 32
Automatic Repeater Offset, Transmitting A 1750 Hz Tone
View all Kenwood TM-281A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
AUTOMATIC REPEATER OFFSET This function automatically selects an offset direction, according to the frequency on the VHF band. The transceiver is programmed for an offset direction as shown below. To obtain an up-to-date band plan for repeater offset direction, contact your national Amateur Radio association. Note: Automatic Repeater Offset does not function when the Reverse function is ON. However, pressing [REV] after Automatic Repeater Offset has selected an offset (split) status, exchanges the receive and transmit frequencies. 1 Press [F], [MENU] and turn the Tuning control to select Menu No. 11 (ARO). 2 Press [MENU] and turn the Tuning control to switch the function "ON" (default) or "OFF". 3 Press [MENU] to store the setting or any other key to cancel. 4 Press any key other than [MENU] to exit Menu Mode. TRANSMITTING A 1750 Hz TONE Call Channel default settings: • On M market models, pressing [CALL] changes the transceiver to the Call Channel {page 35}. To change the setting of the CALL key: 1 Press [F], [MENU] and turn the Tuning control to select Menu No. 19 (CK). 2 Press [MENU] and turn the Tuning control to select "CALL" or "1750". 3 Press [MENU] to store the setting or any other key to cancel. 6 4 Press any key other than [MENU] to exit Menu Mode. This transceiver is also capable of remaining in the transmit mode for 2 seconds after transmitting the tone. 1 Press [F], [MENU] and turn the Tuning control to select Menu No. 20 (HLD). 2 Press [MENU] and turn the Tuning control to select "ON" or "OFF" (default). 3 Press [MENU] to store the setting or any other key to cancel. 4 Press any key other than [MENU] to exit Menu Mode. 25