Kenwood TS-2000X Operation Manual - Page 68
Memory Features, MEMORY CHANNELS
View all Kenwood TS-2000X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
MEMORY FEATURES MEMORY CHANNELS The TS-2000(X) provides you with 300 memory channels, numbered 00 to 299, for storing operating frequency data, modes and other information. Memory channels 00 to 289 are called Conventional Memory Channels. Memory channels 290 to 299 are designed for programming VFO tuning ranges and scan ranges. The data you can store is listed below: Conventional memory is used for storing data you will often recall. For example, you may store the frequency where you regularly meet your club members. Parameter RX frequency TX frequency Channel 00 ~ 289 Yes Yes Channel 290 ~ 299 Yes 1 (simplex) RX mode TX mode Yes Yes 1 Yes (simplex) Start/ End frequencies No Yes Offset frequency Yes Yes Shift direction Yes Yes Reverse mode Yes Yes RX frequency step size TX frequency step size Yes Yes Yes (simplex) Tone frequency Yes Yes CTCSS frequency Yes Yes DCS code Yes Yes Tone/ CTCSS/ DCS mode ON/ OFF Yes Yes Memory name Yes Yes Memory Channel Lockout ON/ OFF Yes 1 Yes 1 1 Changing the data after recalling a memory channel overwrites the contents of the channel. STORING DATA IN MEMORY There are 2 methods used for storing transmit/receive frequencies and associated data in memory channels 00 to 289. Use either method, depending on the relationship of the receive and transmit frequencies you store: • Simplex channels: RX frequency = TX frequency • Split-frequency channels: RX frequency ≠ TX frequency Memory channels 290 to 299 can also be used as simplex channels. Note: When RIT or XIT is ON, the frequency that includes the RIT or XIT offset will be stored. ■ Simplex Channels 1 Press [A/B] to select VFO A or VFO B. • "tA" or "tB" appears to show which VFO is selected. 2 Select the frequency, mode, etc. to be stored. 3 Press [M.IN] to enter Memory Scroll mode. • To exit Memory Scroll mode and abort the storage process, press [CLR]. 4 Turn the MULTI/ CH control, or press Mic [UP]/ [DWN] to select a memory channel. • You can also select a channel by entering a 3-digit number, such as 012, using the numeric keys. 5 Press [M.IN] again to store the data. • The previous data stored in the channel is overwritten. 58