Kenwood VR-509 User Manual - Page 10

Digital connections 10 The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD) format digital signals. If you have connected any digital components to the receiver, be sure to read the "Input mode settings" section carefully. 7 Preparations S VIDEO PLAY IN REC OUT PLAY IN PLAY IN PLAY IN L MONITOR OUT DVD VIDEO 1 VIDEO 1 VIDEO 2 VIDEO 3 B R L R A R L C R L DVD VIDEO 2 COAXIAL CD/DVD OPTICAL DIGITAL IN VIDEO 3 OPTICAL MONITOR OPTICAL DIGITAL OUT OPTICAL DIGITAL IN (AUDIO) MD player Setting up the system OPTICAL DIGITAL OUT (AUDIO) Optical fiber cable OPTICAL DIGITAL OUT (AUDIO) Component with DTS, Dolby Digital, or PCM OPTICAL DIGITAL OUT Connect the video signal and digital audio signals to the VIDEO 3 jacks. (See "Connecting video compo- nents".) 9 CD player COAXIAL DIGITAL OUT (AUDIO) COAXIAL DIGITAL OUT (AUDIO) RF digital demodulator (DEM-9991D) (sold separately) Component with DTS, Dolby Digital, or PCM COAXIAL DIGITAL OUT Connect the video signal and analog audio signals to the VIDEO 2 jacks. (See "Connecting video compo- nents".) 9 DOLBY DIGITAL RF OUT (AUDIO) PCM OUT LD player To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D). Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver. Connect the video signal and analog audio signals to the VIDEO 2 or VIDEO 3 jacks. (See "Connecting video components".)