Kenwood VR-509 User Manual - Page 47
Remote control unit, In case of difficulty, Additional Information
View all Kenwood VR-509 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
In case of difficulty Remote control unit Symptom Cause 47 Remedy The battery indicator flashes during opera- • The batteries are nearing exhaustion. tion. • Replace with new batteries to preserve the currently registered setup information. & Subwoofer volume cannot be adjusted. • Subwoofer is OFF. • Turn the subwoofer ON. ) Certain inputs cannot be selected using the • No setup codes registered at for the respective • Register a setup code or Non-IR code at the remote control. input(s). respective input(s). ‹ Remote control operation is not possible. • The remote control is set to a different operation mode. • Batteries are exhausted. • The remote control unit is too far away from the main system, controlling angle is too large, or there is an obstacle between the receiver and the remote. • The audio cords and system control cords are not connected properly. • No software is loaded in the source component. • An attempt is made to play a tape which is being recorded in the cassette deck. • The remote control has not been set to the operation mode for the component you wish to control. • The microprocessor of the remote control malfunctions. • Press the MUSIC, MOVIE, or TV keys to select the appropriate operation mode. • Replace with new batteries. & • Operate the remote control unit within the con- trollable range. • Connect properly referring to "Setting up the system". 7 • Place software in the source component you want to play. • Wait until recording has completed. • Press the MUSIC, MOVIE, or TV keys to acti- vate the operation mode for the component you want to control before operation. › • Reset the microprocessor. y Additional Information