Kenwood VR-50RS User Manual - Page 28

Ambience effects Dimension mode (Pro Logic IIx Music mode and Pro Logic II Music mode only) When listening to music with certain recordings, you will also be able to achieve a suitable balance from all the speakers by adjusting the dimension mode. 1 Press the SOUND key repeatedly until "DIMENSION" appears on the display. • The DIMENSION indication scrolls across the display. 2 Use the MULTI CONTROL knob or MULTI CONTROL %/fi keys to adjust the soundfield towards the rear or the front. Soundfield is adjusted towards the front. Display dimmer adjustment The dimmer function lets you select the brightness of this model's display. You might find this useful if you darken your room to watch movies or listen to music. If you want to use the remote control unit, press the TUNER, MD/ TAPE, VIDEO 1, VIDEO 2 or AUX key on the remote control unit to set it to the receiver control mode. Each time you press the DIMMER key, the display brightness changes among the three available settings. Select the brightness level you find most pleasing. Soundfield is in neutral position. Soundfield is adjusted towards the rear. Center Width mode (Pro Logic IIx Music mode and Pro Logic II Music mode only) Center Width adjustment allows you to enjoy an enhanced sound when listening to music through center image from only center speaker, or left and right speakers or various combinations adjustments. 1 Press the SOUND key repeatedly until "CENTER WIDTH" appears on the display. • The CENTER WIDTH indication scrolls across the display. • When the center speaker is switched OFF, this mode will not be effective. 2 Use the MULTI CONTROL knob or MULTI CONTROL %/fi keys to adjust the left-center-right output. Center image will be heard from center speaker only. 96kHz LPCM playback This model is compatible with the 96kHz LPCM playback. To play a 96kHz DVD, set the listen mode to "STEREO". • In F-AUTO input mode, the listen mode will automatically be STEREO. • When in D-MANUAL input mode (listen mode is not STEREO), "FS 96kHz" will appear in the display and no sound can be heard from the speakers. Press the LISTEN MODE key (the listen mode changes to the STEREO mode) to output sound from the speakers. Center image will be heard from left and right speakers only. • When in other positions, center image from center speaker, left and right speakers can be heard simultaneously with various combinations. 28 EN