Kenwood XD-751 User Manual - Page 25
Selection of DOLBY NR, To stop playback, Selection of reverse mode., To wind tape at high speed,
View all Kenwood XD-751 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
25 Let's put out some sound XD-SERIES (En) Preparation section Basic section To wind tape at high speed To fast wind in direction | To fast wind in direction \ 1 2 7 3 ¡ To stop playback 7 ÷ Press the & key to stop fast winding. Selection of reverse mode. REV.MODE Each press switches the modes as follows. 1 "[" ... Both sides are played back (recorded), and then the tape stops. 2 """ .. Both sides are played back endlessly. (The tape stops after recording onto both sides.) 3 """ .. Only one side is played back (recorded), and then the tape stops. ÷ Do not take out the cassette tape until the tape transport has stopped completely. Selection of DOLBY NR (Noise Reduction) The Dolby NR system minimizes the hiss noise heard when playing tape. When playing a tape prerecorded with Dolby NR ON, be sure to set the DOLBY NR ON for playback. DOLBY NR Lit when "DOLBY NR" is ON. TAPE B0 NR Each press switches the modes as follows. 1 "1 NR" ON DOLBY NR is used. 2 "1 NR" OFF DOLBY NR is not used. ÷ Select the Dolby NR mode according to the recording condition of the tape. ÷ Normal (TYPE ), high (TYPE ), or metal (TYPE set automatically. ÷ Remove tape slack before loading. ÷ Close the door securely. ) tape selection is Displays the selected deck. TAPE B00 00 NR Displayed when the deck is loaded with a tape. Reverse mode indication ÷ If the tape transport direction is opposite to the desired direction, press the play key corresponding to this. Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. "DOLBY" and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Transport direction indicators The indicators (2 , 3) indicate the current direction in which the tape advances when playback or recording is started automatically by the easy operation function, etc. This direction is the direction stored in memory when the tape was last stopped. (To switch the tape transport direction, press the play key corresponding to the desired direction then press the stop (7) key.) TAPE B00 00 NR Transport direction indicators ÷ Only the tape transport direction of deck B is shown when the selected input is other than TAPE. ÷ To see the tape transport direction of deck A, press the A/B key to switch to deck A. Please play back tapes recorded with equalizer etc. without Note applying any effect. Application section Knowledge sections