Kenwood XD-751 User Manual - Page 27

27 Let's put out some sound Searching for the desired music program (DPSS) XD-SERIES (En) The DPSS (Direct Program Search System) is capable of detecting non-recorded spaces of more than 4 seconds as "blanks between programs" and, based on this information, can return to the beginning of the music program being played or the beginning of a desired program by skipping up to 16 other programs. During play in direction 3 To play the next program : Press once. To play the 4th program after the current program : Press 4 times. 1 2 7 3 ¡ Preparation section Basic section To return to the beginning of the current program : Press once. To play the 4th program before the current program : Press 5 times. During play in direction 2 1 2 7 To return to the beginning of the current program : Press once. To play the 4th program before the current program : Press 5 times. 3 ¡ To play the next program To play the 4th program after the current program : Press once. : Press 4 times. Application section Knowledge sections Notes The DPSS may not function normally with the following kinds of tape. ÷ Tapes containing several no-sound intervals of more than 4 seconds, such as conversation and talk tapes. ÷ Tapes containing pianissimo sections, such as classical music tape. ÷ Tapes in which large noise is recorded in blanks between programs. ÷ Tapes containing blanks between programs that are shorter than 4 seconds. ÷ Tapes recorded at low level. ÷ Tapes recorded by cross-fade recording (in which the beginning of next program is overlapped on the end of previous program).