Kenwood XD-751 User Manual - Page 59

Important Items Maintenance 59 XD-SERIES (En) Cleaning the head section Cotton swab Capstan Head Pinch roller Cleaning the heads and peripheral components For maintaining the best condition of the deck and for longer service life, always keep the heads (recording / playback / erase), capstan and pinch roller clean. To clean them, perform the following: 1. Open the cassette holder. 2. Using a cotton swab dipped in alcohol, clean the head (recording / playback / erase), capstan and pinch roller carefully. Demagnetizing the head When the recording / playback head is magnetized, the sound quality will deteriorate. In such a case, demagnetize the head using a commercially available demagnetizer (head eraser). Tape guides There are precisely aligned parts around the heads, including the tape guides. Note When cleaning, pay special attention so as not to apply shock to them. Maintenance of the set When the front panel or case becomes dirty, wipe with a soft, dry cloth. Do not use thinner, benzine, alcohol, etc. for these agents may cause discoloration. In regardto contact cleaner Do not use contact cleaners because it could cause a malfunction. Be specially careful not to use contact cleaners containing oil, for they may deform the plastic component. Preparation section Basic section Application section Reference Sound Retrieval System manufactured under licence from SRS Labs, Inc. "SOUND RETRIEVAL SYSTEM" and the SRS Symbol SRS R are trademarks of SRS Labs, Inc. Purchase of this product does not convey the right to sell recordings mode with the SOUND RETRIEVAL SYSTEM. Note related to transportation and movement (CD player) Before transporting or moving this unit, carry out the following operations. 1. Turn the power ON but do not load a disc. 2. Press the 6 key. 3. Wait a few seconds, and ensure that the display is as shown below. CD NO DI sC 123 4. Wait for a few seconds then turn power off. Caution on condensation Condensation (of dew) may occur inside the unit when there is a great difference in temperature between this unit and the outside. This unit may not function properly if condensation occurs. In this case, leave the unit for a few hours with the power left ON, and restart the poeration after the condensation has dride up. Be specially cautious against condensatin in a following circumsatance: When this unit is carried from a place to another across a large difference in temperature, when the humidity in the room where this unit is installed increases, etc. Memory backup function Stored contents which are cleared immediately when power plug is unplugged from power outlet Clock display Stored contents which are cleared in at least a day after power plug is unplugged from power outlet Amplifier POWER status (ON or OFF) Input selection Volume control value Equalizer's manual memory created by the user SRS 3D level Tuner unit Receiving band Frequency Preset stations Program timer setting contents Cassette deck unit Transport direction DOLBY NR Reverse mode Knowledge sections When your unit needs to be repaired, bring the entire set (Speakers excluded) to your dealer.