KitchenAid K4SSWH Use & Care Guide - Page 17
Troubleshooting Problems - beater
View all KitchenAid K4SSWH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Troubleshooting Problems Please read the following before calling the service center. 1. The stand mixer may become warm during use. Under heavy loads with extended mixing time periods, you may not be able to comfortably touch the top of the stand mixer. This is normal. 2. The stand mixer may emit a pungent odor, especially when new. This is common with electric motors. 3. If the Flat Beater hits the bowl, stop the stand mixer. See "Beater to Bowl Clearance" section. If your stand mixer should malfunction or fail to operate, please check the following: - Is the stand mixer plugged in? WARNING - Turn the stand mixer off for 10-15 seconds, then turn it back on. If the mixer still does not start, allow it to cool for 30 minutes before turning it back on. If the problem is not due to one of the above items, see the KitchenAid® stand mixer Warranty section. Do not return the stand mixer to the retailer - retailers do not provide service. USA/Puerto Rico: 1-800-541-6390 Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. - Is the fuse in the circuit to the stand mixer in working order? If you have a circuit breaker box, be sure the circuit is closed. 15