KitchenAid KDRP463LSS Installation Instructions - Page 3
KitchenAid KDRP463LSS - 36" Pro-Style Dual Fuel Range Manual
View all KitchenAid KDRP463LSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Parts supplied for installation 1-3/4" (4.4 cm) 1" (2.5 cm) NOTE: regulator located at center bottom of range. 36" (91.4 cm) cooktop width Product dimensions 9-1/4" (23.5 cm) FF O FFO FF O FF O FF O 45" (114.3 cm) overall height 2 - #10 x 2" phillips head screws anti-tip brackets FFO FFO FF O • Anti-tip bracket must be securely attached to a wall stud. Thickness of finished wall may require using longer screws to anchor the bracket. • L.P. conversion kit is included in literature package. • Backguard and island trim. The backguard included with the range must be installed when a standard 24" (61 cm) deep base cabinet is used and there is zero clearance between the back edge of range and combustible rear wall. For island installations or other installations with more than 5" (12.7 cm) clearance to back wall, use the optional stainless steel island trim, included with the range, to cover the backguard mounting flanges. 1/4" (6.4 mm) spacer 36" (91.4 cm) cooktop height with feet loosened 3/4 turns 26-1/2" (67.3 cm) width with control panel 36" (91.4 cm) width 36" (91.4 cm) range with all sealed burners shown Cabinet opening dimensions 13" (33 cm) max. upper cabinet depth 36" (91.4 cm) min. upper cabinet width For minimum clearance to top of range, see NOTE.* 18" (45.7 cm) upper cabinet to countertop 36-1/4" (92.1 cm) opening width 4" (10.2 cm) min. clearance from both sides of range to side wall or other combustible material above cooking surface 0" (0 cm) clearance from both sides and back of range to adjacent combustible construction below cooking surface 8" (20.3 cm) *NOTE: 42" (106.7 cm) min. when bottom of wood or metal cabinet is protected by not less than 1/4" (6.4 mm) flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper. 48" (121.9 cm) min. clearance between the top of the cooking platform and the bottom of an unprotected wood or metal cabinet. 4" (10.2 cm) 3-1/2" (8.9 cm) maximum junction box height junction box to be located in this area 20" (50.8 cm) 3" (7.6 cm) maximum gas line height 28" (71.1 cm) gas line opening to be located in this area 5-1/2" (14 cm) 12" (30.5 cm) 3