KitchenAid KGCU463VSS Installation Guide - Page 6

Cabinet Requirements C O D N E P F L J K D E C G H I A** L B min.* M A. See chart. B. See chart. C. See chart. D. See chart. E. See chart. F. 18" (45.7 cm) min. clearance upper cabinet to countertop G 1.9 cm) back of cabinet cutout to gas opening cutout H. 6⁷⁄₈" (16.1 cm) gas opening cutout depth I. 12½" (31.7 cm) gas opening cutout width J. 22¹⁄₄" (56.5 cm) cabinet cutout depth K. 2" (5.1 cm) cabinet side to gas cutout L. 6" (15.2 cm) min. distance on both sides of the cooktop to the side wall or other combustible material above cooking surface M. 24" (61.0 cm) cabinet depth N. 7¹⁄₄" (18.4 cm) cabinet depth to countertop O. Notch to be equal on both sides P. 13" (33.0 cm) upper cabinet depth Size Model A** Cooktop Cutout to Back Wall B* Cooktop to Cabinet C Optional Backguard Opening D Cabinet and Countertop E Countertop Only 30" (76.2 cm) KGCU407 1½" (3.8 cm)** 30" (76.2 cm) 30" (76.2 cm) 29¼" (74.3 cm) 30" (76.2 cm) or 29⁷⁄₈" (75.9 cm) for zero clearance 36" (91.4 cm) KGCU462 KGCU463 KGCU467 1½" (3.8 cm)** 1¾" (4.4 cm) 1¾" (4.4 cm) 42" (106.7 cm) 36" (91.4 cm) 35¼" (89.5 cm) 36" (91.4 cm) or 35⁷⁄₈" (91.1 cm) for zero clearance 48" (121.9 cm) KGCU482 KGCU483 KGCU484 1½" (3.8 cm)** 1¾" (4.4 cm)** 1½" (3.8 cm)** 42" (106.7 cm) 48" (121.9 cm) 47¼" (120.0 cm) 48" (121.9 cm) or 47⁷⁄₈" (121.6 cm) for zero clearance * NOTES: Dimension "B" can be reduced by 6" (15.2 cm) when bottom of wood or metal cabinet is covered by not less than 0.25" (6.4 mm) flame retardant millboard covered with not less than No. 28 MSG sheet metal, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper. If installing a range hood above the cooktop, follow the range hood instructions for dimensional clearances above the cooktop surface. ** NOTE: If backwall is constructed of a combustible material and a backguard is not installed, a minimum clearance of dimension A + 6" (15.2 cm) is required for 48" (121.9 cm) cooktops and cooktops with a grill. 6