KitchenAid KGSS907SBL Installation Instructions - Page 9
Installation Instructions - slide in range
UPC - 883049027517
View all KitchenAid KGSS907SBL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
INSTALLATION INSTRUCTIONS Unpack Range 2. Measure from the floor to the underside of the range cooktop. B WARNING Excessive Weight Hazard Use two or more people to move and install range. Failure to do so can result in back or other injury. 1. Remove shipping materials, tape and film from the range. Keep cardboard bottom under range. Remove oven racks and parts package from inside oven. 2. To place range on its back, take 4 cardboard corners from the carton. Stack one cardboard corner on top of another. Repeat with the other 2 corners. Place them lengthwise on the floor behind the range to support the range when it is laid on its back. Using 2 or more people, firmly grasp the range and gently lay it on its back on the cardboard corners. C A D A. Distance from the floor to underside of range cooktop B. Grate C. Cooktop surface D. Range side frame 3. Your leveling height will be the difference between the 2 measurements you have just taken. Freestanding Ranges: Measure for Proper Height Slide-In Ranges: 1. Measure the distance of the countertop to the floor. 2. Measure from the top of the range cooktop trim to the floor. 1. Measure the distance of the countertop to the floor. Measure at all 4 locations corresponding to the 4 corners of the underside of the range cooktop, as shown. C A D B A A. Distance from the top of the range cooktop trim to the floor 3. Your leveling height will be the difference between the 2 measurements you have just taken. Measure at locations marked A, B, C, D. 9