KitchenAid KOSE500ESS Installation Guide - Page 14
Install Oven
View all KitchenAid KOSE500ESS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
3-Wire Cable from Home Power Supply - U.S. Only IMPORTANT: Use the 3-wire cable from home power supply where local codes permit a 3-wire connection. A B C G H D E I F Install Oven 1. Using 2 or more people, lift the oven partially into the cabinet cutout. Use the oven opening as an area to grip. NOTE: Push against seal area of the oven front frame when pushing the oven into the cabinet. Do not push against the outside edges. A. Cable from home power supply B. Junction box C. Black wires D. White wires E. Green (or bare) ground wire (from oven) F. 4-wire flexible conduit from oven G. Red wires H. UL listed wire connectors I. UL listed or CSA approved conduit connector 1. Connect the 2 black wires (C) together using a UL listed wire connector. 2. Connect the 2 white wires (D) and the green (or bare) ground wire (of the oven cable) using a UL listed wire connector. 3. Connect the 2 red wires (G) together using a UL listed wire connector. 4. Install junction box cover. 2. Push against the seal area of the front frame to push the oven into the cabinet until the back surface of the front frame touches the front wall of the cabinet. 3. Push oven completely into the cabinet and center the oven into the cabinet cutout. 4. Remove the tape from black front trims. ■ Securely fasten the oven to the cabinet using the #8-14 x ¾" screws provided. ■ Insert the screws through hole in black trim aligning with hole in oven frame. Do not overtighten screws. A B C A. Oven frame B. Oven frame hole C. Black trim piece 14