KitchenAid KOSE500ESS Installation Guide - Page 9

Cutout Height is Between 26, and 27, 68.4 cm and, Cutout Height is Between 28, and 29, 72.8 cm

Page 9 highlights

Cutout Height is Between 26 and 27 68.4 cm and 70.3 cm) 1. Using 2 or more people, place the oven on its back on a covered surface. Cutout Height is Between 28 and 29 72.8 cm and 74.8 cm) 1. Using 2 or more people, place the oven on its back on a covered surface. 2. Remove the foot from the right front spacer by removing the #8-18 x ³⁄₈" screw. NOTE: Do not remove the spacer. 2. Remove the foot from the right front spacer by removing the #8-18 x ³⁄₈" screw. NOTE: Do not remove the spacer. A B C A. Spacer B. Foot C. #8-18 x ³⁄₈" screw 3. In the same manner, remove the feet on the right rear, left front, and left rear of the oven. 4. Using 2 or more people, place the oven in its upright position. A B C A. Spacer B. Foot C. #8-18 x ³⁄₈" screw 3. Rotate the foot 90° so the short side of the foot is positioned toward the top of the oven. 5. Go to the "Make Electrical Connection" section. 4. Reinstall the foot to the spacer using the #8-18 x ³⁄₈" screw previously removed. 5. In the same manner, remove, rotate and reinstall the feet on the right rear, left front, and left rear of the oven. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

9
Cutout Height is Between 26
¹⁵⁄₁₆
" and 27
¹¹⁄₁₆
" (68.4 cm and
70.3 cm)
1.
Using 2 or more people, place the oven on its back on a
covered surface.
2.
Remove the foot from the right front spacer by removing the
#8-18 x
³⁄₈
" screw.
NOTE:
Do not remove the spacer.
3.
In the same manner, remove the feet on the right rear, left
front, and left rear of the oven.
4.
Using 2 or more people, place the oven in its upright position.
5.
Go to the “Make Electrical Connection” section.
Cutout Height is Between 28
¹¹⁄₁₆
" and 29
⁷⁄₁₆
" (72.8 cm and
74.8 cm)
1.
Using 2 or more people, place the oven on its back on a
covered surface.
2.
Remove the foot from the right front spacer by removing the
#8-18 x
³⁄₈
" screw.
NOTE:
Do not remove the spacer.
3.
Rotate the foot 90° so the short side of the foot is positioned
toward the top of the oven.
4.
Reinstall the foot to the spacer using the #8-18 x
³⁄₈
" screw
previously removed.
5.
In the same manner, remove, rotate and reinstall the feet on
the right rear, left front, and left rear of the oven.
A. Spacer
B. Foot
C. #8-18 x
³⁄₈
" screw
A
B
C
A. Spacer
B. Foot
C. #8-18 x
³⁄₈
" screw
A
B
C